Washer Extractor

Washer Extractor Washer Extractor (High Spin, Soft Mount)
Model: GTWE-001
MATERIAL OF CONSTRUCTION 

• Outer Drum: Stainless Steel AISI 316 Quality 2mm.
• Inner Basket Size of Inner: Periphery in Stainless Steel AISI 316 Quality 2mm sides 5 mm (back)/2.5 mm Front Plate: 2.5 mm SS AISI 316 Quality, highly polished.

Capacity

• 15 Kilograms
• 30 Kilograms
• 60 Kilograms
• 120 Kilograms

Heating System Available in

• Electric
• Steam
• Gas
• Door: SS Die pressed highly polished Door. 2.5 mm.
• Door Opening: S.S. AISI 316.
• Door Interlock: Pneumatic cylinder used to lock the door electro pneumatically so that it opens only after the complete operation is over.
• Pulleys & Belts: With taper lock bush pulley.
• Drive Motor:VFD Controlled.
• Bearing: Heavy duty, 21314 2RS – 21315 2RS.
• Bearing Housing: A large close grained cast iron bearing housing duly machined on computerized machine with two extra wide roller bearing that are permanently lubricated for trouble free operation. In addition, 4 high quality seals provide four times the sealing power to isolate.
• Water Inlet: 50mm x 1 No. BSP Pneumatic operated valve.
• Paint: PU Paint. Complete phosphating done on the heavy base before.
• Fabricated:100mm & 80mm of MS pipe used with SS 316 Cladding mat finished.
• Full automatic, Electric heating system consist with air brake contactors, controllers, MCB variable frequency drive with
  reverse timer change over timer and main supply connectors for controlling both drive & heater.
• Dosing System: Provided 3 compartments of 1 Liters each with centrifugal pump & S.S. jets incorporated through solenoid valves.
• Drain: 80 mm X 1 No. pneumatic operated, Butterfly valve used or Electric Valve.
• Suspension: Through Heavy duty, special designed springs, shock absorber.
• Control: Microprocessor Controlled.
• Electric Consumption: 18 – 24 KW heaters used.

Note

• Standard Machine operate on 440 V, 3 phase, 50HZ CYS AC Electric supply, Special Voltage on request.
• Machines are also made to order as per customer’s requirements & specifications.